Here are some binaries of SGI O2 kernels, that I am able to boot. They are built from my working tree. Some of my patches are available at min patchset page. Note, however, that R10K/R12K kernals are still not supported. R10K workaround have not been implemented. They may (or may not) boot, and even may run for a short while, but don't ask me anything about them.
Also included is binary of IP27 (Origin 200/2000) kernel. It is based on linux-mips.org CVS + some minimal patches from Ralf.
If you have any questions about these kernels, feel free to (in order of preference):
| Kernel | .config | Date | size | Comment | |
|---|---|---|---|---|---|
| R5K, 64bit | .config | 2004-01-15 | 4.7M | ||
| R5K, 64bit, FB | .config | 2004-01-24 | 4.8M | FB is configured with 2M of RAM - limits modes available respectively. | |
| R1[02]K, 32bit | .config | 2004-01-25 | 3.5M | This one should run on both R10K and R12K. Runs surprisingly well on R12K so far, despite the fact R10K workaround is still unimplemented. | |
| R5K, 64bit, FB | .config | 2004-03-15 | 5.9M | Minpatchset kernel. FB is configured with 2M of RAM - limits modes available respectively. | |
| IP27 | .config | 2004-04-28 | 5.8M | IP27 (Origin200 & Origin2000). | |
| IP27 | .config | 2004-05-28 | 2.0M | IP27 (Origin200 & Origin2000). | |
| IP27 | .config | 2005-07-03 | 1.8M | IP27 (Origin200 & Origin2000). Diff against linux-mips.org CVS | |
| IP27 | .config | 2006-09-05 | 9.0M | IP27 (Origin200 & Origin2000). Git as of 2006-09-05 + some patches from Gentoo mips-sources tarball |